High Shank Compensating Presser Foot - Left Side 3/8"

Brand New Left Side Compensating Presser Foot for Industrial Sewing Machines.

Compensating presser foot is used for creating an even stitch along the edge of the material. This foot is Left toe yielding. This Left Side foot will guide the garment to stitch on even edge to the left side of the sewing needle.

There are 8 different sizes to choose from in our store, depending how close you want the stitch from the edge of the material. Available sizes are :

1/32", 1/16", 1/8", 3/16", 1/4" , 5/16", 3/8", 1/2"

This foot will fit most Single Needle Industrial Sewing Machines including :

Brohter : B705, B707, B715, B716, B735, B737, B738, B745, B755, B757, B758, B767, B781, PQ1300, PQ1500

Consew : 30, 98, 99, 102, 103, 105, 210, 217, 218, 219, 220, 230, 290, 310, 2230, 7360R-1

Econosew : DDL-5550, DDL-8500, DDL-8700

Feiyue : 8500, 8700

Gemsy : 8700

Janome : 1600P, 1600P-DB

Juki : DDL-127, DDL-227, DDL-500, DDL-552, DDL-553, DDL-555, DDL-5550, DDL-5600, DDL-8300, DDL-8500, DDL-8700, TL98E, TL98Q, TL98QE

MITSUBISHI : DB-120, DB-121, DB-122, DB-126, DB-130, DB-170, DB-189, DB-199, LS2-130, LS2-150, LS2-180, LS2-190, LS2-1130

RELIABLE : MSK-8800, MSK-8550M, MSK-8870M

REX : RX8500

SINGER : 95, 96, 120U, 121C, 121D, 188K, 191D, 195K, 196K, 241, 251, 281, 366K, 400W, 402W, 451K, 491D, 591D, 600W, 660A, 691D, 770D, 771D, 2191, 2491D

SUNSTAR : KM-123A, KM-123B, KM-137A, KM-137B, KM-146BL, KM-250

TACSEW : 5550, T8700

TAIKO : TK-505, TK-510

YAMATA : FY8500, FY8700

and many more!

This compensating foot will also fit many other Household and Industrial sewing machines with high shank presser foot system - 1 inch tall, from the center of the fastening screw to foot bottom. Please e-mail with Make/Model of your sewing machine if in doubt.